Muratec MFX-2350 Bedienungsanleitung PDF herunterladen (Seite 34)

1-28 Getting Started

“Mail

Server”

Sending mail (SMTP)

Server

Enter the domain name or IP address of the

SMTP server used for sending e-mail.

When entering a domain name, it can be

entered up to 50 characters.

Receiving mail (POP3)

Server

Enter the domain name or IP address of the

POP3 server used for receiving e-mail.

When entering a domain name, it can be

entered up to 50 characters.

NOTE: You must register both the SMTP and

POP3 server ﬁelds even if they are the

same.

User ID for POP3 Enter the user ID for the POP3 server.

Up to 50 characters can be registered.

Password for POP3 Enter the password for the POP3 server.

Up to 50 characters can be registered.

Check for New Mail Set the interval at which the mail server is to

check for new mail. The minimum value is 5

seconds and the maximum is 99 hr 59 min 59

sec.

The default setting is 10 min.

If you want to check for mail manually, set

all of these values to “0”. In this case, you can

receive an arrived e-mail by the following

procedures.

1. Press [FAX] on the control panel of your

machine.

2. Press [Others] on the display.

3. Press [Next] to show the next screen.

4. Press [Check Mail].

Receive before Sending For some providers, POP authentication is

required before sending (send request to SMTP

server). In this case, select this item.

SMTP Port No. Enter the SMTP port number. (0–65535)

Normally, set to “25”.

POP3 Port No. Enter the POP port number. (0–65535)

Normally, set to “110”.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 163 164

Kommentare zu diesen Handbüchern

Keine Kommentare

Muratec MFX-2350 Bedienungsanleitung Seite 34

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multifunktionsgeräte Muratec MFX-2350