Muratec MFX-1330 Spezifikationen PDF herunterladen (Seite 179)

4-17

What you see on the LCD What it means/What to do

No Command Stored You pressed REVIEW COMMANDS to review upcoming commands, but

your fax machine had none stored.

No Department Code You tried to turn on the department code setting but there are no department

codes stored in your fax machine.

Store at least one department code, then try again.

. . . or . . .

You entered incorrect department code at fax sending while the department

feature is on.

Enter correct department code.

No Document Stored You tried to print a document from memory, but your fax machine had none

stored.

No Drum The drum cartridge is missing or has not been properly installed in your fax

machine.

Please properly install the drum cartridge.

No Number Stored You selected an autodialer, batch box or F-Code box number for which there

is no fax (or phone) number programmed.

Either choose another number or dial a phone number directly from the

numeric keypad.

No Passcode You tried to program a security feature, but there’s no protection passcode

stored in your fax machine.

Store a protection passcode in your machine, then retry again.

No PIN Number You selected “Mode1” in the pin mask feature and tried to call an autodialer

number in which no PIN has been entered, or to call using numeric keypad

without PIN.

Enter a PIN, then try again.

No Report You requested an activity journal or confirmation report, but your fax

machine has no record of any fax jobs having occurred.

No Toner Cartridge The toner cartridge is missing or has not been properly installed in

your fax machine. Please properly install the toner cartridge.

Not Allowed in Macro During macro registration, you pressed the key which cannot be registered

in Macro, such as MONITOR/CALL key or SECURITY RECEPTION key.

Other Key Setting You tried to enter the same function which is already stored in other Soft

key.

Store the different function.

Open 1st Side Cover The paper is jammed in your fax machine.

Please Remove Paper Open the cover indicated on the LCD, and remove the jammed paper

Open 2nd Side Cover carefully.

Please Remove Paper

Open&Close ScanCover Either your document wasn’t inserted correctly, or the fax to which you’re

Reset Document sending can’t handle the document’s page length.

Reset the page and try again.

Paper Mismatch In PC printing, the size of paper in the paper cassette is not match up the

Set XXX paper paper size you specified by printer driver. Press

STOP to cancel a print job.

Press Stop Then set the correct size of paper and try printing again.

Paper Mismatch In PC printing, the direction of the A5-sized paper on the bypass tray is

Rotate the paper wrong.A5

is not available for PC printing.

Press Stop Set the A5

on the bypass tray.

Please Call Service The printer unit of your fax machine has become inoperable.

XXX See page 4-21.

Please Supply Paper The paper cassette or bypass tray is out of paper.

Supply paper to the cassette and/or the bypass tray.

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 289 290

Kommentare zu diesen Handbüchern

Keine Kommentare

Muratec MFX-1330 Spezifikationen Seite 179

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multifunktionsgeräte Muratec MFX-1330