Muratec MFX-2030 Installationshandbuch PDF herunterladen (Seite 14)

12 Installation Manual

NOTE: If a DHCP (Dynamic Host Conﬁguration Protocol) server is not installed

on your network or if you are not installing the machine on a network, the

message will read “DHCP server did not respond“. You will need to turn

off the DHCP server manually as described in “If your network is not using

DHCP” on page 16.

Step 8 : Turn off the transport mode

(For MFX-2030/1430 only)

When the machine is turned on, the display shows the following message:

Press [Setting], [ ], [1], [4] in this order.

Press [OFF], and then [Enter].

Go back to page 11 Step 7 “Turn the power on” step 3.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Keine Kommentare

Muratec MFX-2030 Installationshandbuch Seite 14